Description
TATTU stands out as a renowned choice among drone enthusiasts. The Tattu 25000mAh 6S 22.8V 25C LiPO battery pack, featuring an XT90 plug, is a favored option for both professional aerial photography & VTOL operator. Its elevated voltage capacity empowers the drone with increased performance and capabilities.
Simplicity reigns supreme, echoing the slogan "Less is more." Each cell within this battery holds an impressive 25000mAh, and when these cells are connected in series, it results in a total capacity that is unparalleled in the entire industry. Nevertheless, TATTU's unwavering dedication is to offer an enhanced flight experience to a broader range of clients. This commitment extends across various domains, such as aerial photography, transportation logistics, surveying and mapping, search and rescue operations, underwater applications, aerial inspections, and agricultural needs, among others.
Note: Please do not choose expedited shipping unless you live in greater Sydney as batteries cannot be shipped by Air.
Features:
- Stable automatic stacking technology makes the single cell capacity can reach 25000mAh.
- The most strict single cell capacity, voltage, resistance, discharge curve matching process.
- Superior Japan and Korea Lithium Polymer raw materials.
- Almost 200Wh/kg energy density.
- At least 150 times cycle life.
Tattu 25000mAh 6S 25C Lipo Battery Specs:
- Balancer Connector Type: JST-XHR-7P
- Brand: Tattu
- Capacity(mAh): 25000
- Balancer Wire Length(mm): 65
- Configuration: 6S1P
- Connector Type: XT90-S
- Discharge Rate (C): 10
- Height(±2mm): 65
- Length(±5mm): 207
- Max Burst discharge Rate (C): 20
- Net Weight(±20g): 2577
- Over 300wh: Yes
- Voltage(V): 22.8
- Width(±2mm): 91
- Wire Gauge: 8#
- Discharge Wire Length(mm): 150mm
Lipo Battery Safety
- Batteries should NEVER be left unattended while charging.
- Be absolutely sure that the Lithium Polymer charger settings are correct for the battery pack being charged – both voltage and current settings.
- Lithium Polymer must be CHARGED and STORED in a fire-safe container like a Lipo Sack.
- Do not charge batteries near flammable items or liquids.
- Keep a dry fire extinguisher nearby or a large bucket of dry sand, which is a cheap and effective extinguisher.
- Never charge inside an automobile even when parked.
- KEEP BATTERIES AWAY from children and pets at ALL times.
- Never discharge below 3.5V per cell as it may cause permanent damage and void warranty
- Battery may explode if damaged or disposed of in fire
- Never leave batteries inside a car on a hot day or any other place where the temperature may exceed 140F / 60C.
- Although environmentally friendly, lithium polymer cells must be FULLY discharged before disposal. Use a resistor setup (light bulbs, for example) to accomplish this, to avoid the possibility of a short-induced fire after disposal.
- Immediately discharge damaged batteries at 1/2 C rate and dispose
- Do not put the loose cells in a pocket, bag, or drawer where they could short-circuit against other items, or the battery tabs could be pressed against each other.
- Take care that the cells are not punctured, especially by metallic objects like hobby knives.
- If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention for this, or for burns.